Printing Data; Saving Data; Confi Rming An Error Message; Switching The Measuring Instrument Off - TESTO 340 Instruction Manual

E.4.4 Printing data

Data are printed out via the function key
tout is possible.
If data are to be transferred to a protocol printer via the infrared or Bluetooth interface,
the printer that is to be used must be activated, see Printer, p. 28.
E.4.5 Saving data
Data are saved either via the function key
functions are only available if saving is
possible.
See also Memory, p. 22.
E.4.6 Confi rming an error message
If an error occurs, an error message is shown in the display.
To confi rm an error message:
Errors which have occurred and have not yet been rectifi ed are shown by a warning
symbol in the header (
Messages for errors which have not yet been rectifi ed can be viewed in the
menu, see Instrument diagnosis, p. 26.
sis
E.4.7 Switching the measuring instrument off
Unsaved readings are lost when the measuring instrument is switched off.
.
- Possibly: The pump starts and the senors are rinsed until the shutoff thresholds
(O > 20%, other parameters < 50ppm) are reached. Rinsing lasts no more than 2
2
minutes.
- The measuring instrument switches off.
Print
Save
OK .
).
Testo-Direct
www.
. The function is only available if a prin-
or the function fi eld
.ca
21
. The
OK Save input
Error diagno-
1.800.561.818