Burner Control; G.2.9 Burner Control - TESTO 340 Instruction Manual

44

G.2.9 Burner control

With the help of the readout adapter for automatic furnaces (0554 1206), status data
and malfunction reports can be read out from compatible automatic furnaces, see also
documentation for readout adapter. The range of data which can be read out is depen-
dent on the automatic furnace type.
Calling up the function:
1 Connect readout adapter to the instrument (PS2 interface) and the automatic furnace
(use adapter ring if necessary).
2
Measurements

Option:
Display type and version of the adapter:
3 OK .
- The data are read from the automatic furnace. An update of the data takes place
every 30s at the latest, this is dependent on the automatic furnace.
Reading out current status data:
The current data are displayed when a connection to the automatic furnace exists. The
following data are displayed with the help of symbols:
Component Status ON
Air controller
Motor
Valve1
Valve 2
Printing data:
.
Print
Display identifi cation data:
OK .
Info

Display failure statistic:
Failure statistic
OK

Burner Control

 
Status OFF
OK .

Testo-Direct
www.
.
.
Adapt.
Component Status ON
Flame
Ignition
Oil prewarmer
.ca
Status OFF
Symbol
not displayed
1.800.561.818