Confi Guration; Instrument Settings; Display Edit - TESTO 340 Instruction Manual

F. Configuration
This chapter describes the possible steps for adapting the product to the particular
measurement task or the requirements of the user.
Familiarity with the contents of the chapter Operation (see p. 15) is assumed
F.1 Instrument settings
F.1.1 Display edit
The parameters/units and the display representation (number of readings displayed per
display page) can be set.
Available parameters and units (may vary from one instrument to another):
Display Parameter
FT Flue gas temperature
AT Ambient temperature
CO2
Carbon dioxide
O2 Oxygen
%
CO Carbon monoxide
uCO
Carbon monoxide undiluted ppm
NO Nitrogen monoxide
NOx
Nitrogen oxide
AT Ambient temperature
Drght Flue draught
SO2
Sulfur dioxide
NO2 Nitrogen dioxide
Itemp
Instrument temperature
DP Flue gas dew point temp.
Effn Effency referred to net
calorific value
Effg
Effency referred to gross
calorific value
ratio Poison index
ExAir
Air ratio
Units Display
°C, °F Air
°C, °F P2
%
Gasfl
GasP
ppm, %, g / GJ,
3
mg/m , mg/kW OilFl
Oil p
ppm, %, g / GJ, OilP
mg/m 3 , mg/kW
Pabs
ppm, %, g / GJ,
mg/m 3 , mg/kW
°C, °F Pump
mbar, hPa, mmWS, P1
inW, Pa, psi, inHG
ppm, %, g / GJ,
mg/m 3 , mg/kW Speed
ppm, %, g / GJ, Flow
mg/m 3 , mg/kW
°C, °F
°C, °F
MCO,
%
MNOx,
MSO2
%
H2
-
%
Testo-Direct
www.
Parameter Units
Air ratio %
Differential pressure mbar, hPa, Pa,
(200hPa) mmWS, inW, psi,
inHG
Gas flow rate m
Gas burner output kW
Oil flow rate kg/h
Oil pressure bar
Oil burner output kW
Absolute pressure hPa , mbar, Pa,
mmWS, inW, psi,
inHG
Pump output l / min
Differential pressure (40hPa) mbar, hPa, Pa,
mmWS, inW, psi,
inHG
Flow speed m/s, fpm
Airflow m
m
f
f
Mass flow kg/h, kg/d, t/d, t/y,
lb/h
Hydrogen ppm
.ca
27
.
3 /h, l / min
3 /s, m 3 /m, m 3 /h,
3 /d, m 3 /y, f 3 /s,
3 /m, f 3 /h, f 3 /d,
3 /y, l/min
1.800.561.818