Hardware Installation Manual
3.8.1
AC Power System
The AC power system is powered from two AC redundant feeds (providing 1+1 power
redundancy) and consists of the following hardware components:
Power Entry Module (PEM/AC/3K) – see Section
Power Supply Module (PS/AC/3K) – see Section
The table below lists the device's AC power specifications.
Parameter
Power Requirements
Power Consumption
Connection Provisions
Version 7.0
Table 3-16: AC Power Supply Specifications
Universal 100-240 VAC input at a nominal 50/60 Hz line
frequency, and power factor correction
Depends on installed blade and configuration:
TP-6310 OC-3/STM-1 Simplex:
2.1A @ 110VAC, 235W
1A @ 230VAC, 235W
TP-6310 OC-3/STM-1 HA:
3.4A @ 110VAC, 373W
1.6A @ 230VAC, 373W
TP-8410 Simplex 24 E1/T1:
1.5A @ 110VAC, 162W
0.7A @ 230VAC, 162W
TP-8410 HA 24 E1/T1:
2.1A @ 110VAC, 230W
1A @ 230VAC, 230W
TP-8410 Simplex 63 E1/84 T1:
2.1A @ 110VAC, 230W
1A @ 230VAC, 230W
TP-8410 HA 63 E1/84 T1:
3.3A @ 110VAC, 336W
1.6A @ 230VAC, 336W
PEM module with 3-prong AC inlet
39
3. Physical Description
3.8.1.1
on page
40
3.8.1.2
on page
41
Value
Mediant 3000