Chassis With Tp-8410 Blades; Table 3-5: Slot Assignment For Mediant 3000 With Tp-8410 - AudioCodes Mediant 3000 Hardware Installation Manual

3.2.2.2

Chassis with TP-8410 Blades

The slot assignment for blades and RTMs in the chassis for TP-8410 is described in the
table below.

Table 3-5: Slot Assignment for Mediant 3000 with TP-8410

Chassis Slot #
Panel
Front
Rear
Hardware Installation Manual
Simplex Mode
1 TP-8410 blade
2 SA/M3K blade
3 Slot covered by a blank panel
4 Slot covered by a blank panel
1 Slot covered by a blank panel
2 RTM-8410 type providing one of
the following interfaces:

16 Spans: single SCSI
connector for 16 E1/T1 spans
and two RJ-45 connectors for
GbE interfaces

42 Spans: two SCSI
connectors for 1-42 E1/T1
spans and two RJ-45
connectors for GbE interfaces

84 Spans: two SCSI
connectors for 1-42 E1/T1
spans and two RJ-45
connectors for GbE interface
(same as for 42 spans)
Note: Trunks 43-84 are
connected to the RTM-8410 in
Slot #4.
3 Slot covered by a blank panel
4 RTM-8410 type providing one of
the following interfaces:

16 Spans: slot covered by a
blank panel

42 Spans: Two SCSI
connectors and two RJ-45
connectors for GbE interfaces
Note: The SCSI ports are not
used.

84 Spans: Two SCSI
connectors for E1/T1 spans
and two RJ-45 connectors for
GbE interfaces
Active TP-8410 blade
Active SA/M3K blade
Note: This blade operates with the
TP-8410 blade in Slot #1.
Standby (redundant) TP-8410 blade
Standby SA/M3K blade
Note: This blade operates with the
TP-8410 blade in Slot #3.
Slot covered by a blank panel
RTM-8410 type providing one of the
following interfaces:

16 Spans: single SCSI connector
for 16 E1/T1 spans and two RJ-
45 connectors for GbE interfaces

42 Spans: two SCSI connectors
for 1-42 E1/T1 spans and two RJ-
45 connectors for GbE interfaces

84 Spans: two SCSI connectors
for 1-42 E1/T1 spans and two RJ-
45 connectors for GbE interface
(same as for 42 spans)
Note: Trunks 43-84 are
connected to the RTM-8410 in
Slot #4.
Slot covered by a blank panel
RTM-8410 type providing one of the
following interfaces:

16 Spans: RTM-8410 providing
only two RJ-45 connectors for
GbE interfaces

42 Spans: two SCSI connectors
and two RJ-45 connectors for
GbE interfaces
Note: The SCSI ports are not
used.

84 Spans: Two SCSI connectors
for E1/T1 spans and two RJ-45
connectors for GbE interfaces
20
Mediant 3000
HA Mode
Document #: LTRT-94720