Tp-6310 Leds Description; Blade Operating Status Leds; Gigabit Ethernet Leds; Table 3-6: Blade Operational Status Leds Description - AudioCodes Mediant 3000 Hardware Installation Manual

3.3.1

TP-6310 LEDs Description

The TP-6310 blade provides LEDs on its front panel, which indicates various operational
status of the blade.
Note: The ATM LEDs are reserved for future use.
3.3.1.1

Blade Operating Status LEDs

The LEDs providing operational status of the TP-6310 is described in the table below.

Table 3-6: Blade Operational Status LEDs Description

Label
FAIL
ACT
PWR
SWAP
READY
3.3.1.2

Gigabit Ethernet LEDs

The Gigabit Ethernet LEDs are described in the table below.
Label
LINK/ACT
1 and
LINK/ACT
2
Hardware Installation Manual
Color Status
Red On Blade failure (fatal error).
- Off Normal operation.
Green On Active blade.
Note: Applicable only to the HA mode.
Yellow Blinking Redundant blade in standby mode.
Note: Applicable only to the HA mode.
Off Standalone blade (i.e., in Simplex mode).
-
Green On Blade is receiving power.
- Off No power is received by the blade.
Blue On The blade can now be fully removed or inserted.
- Off The blade has been inserted successfully.

Table 3-7: Gigabit Ethernet (GBE) LEDs Description

Color Status
Green On Ethernet link is established.
Blinking Data is transmitted or received.
Yellow On Protection (redundant) link is established.
- Off No Ethernet link.
Description
Description
24
Mediant 3000
Document #: LTRT-94720