Physical Description; Hardware Components - AudioCodes Mediant 3000 Hardware Installation Manual

Hardware Installation Manual
3

Physical Description

This section provides a physical description of the device.
3.1

Hardware Components

The device includes the following components:

A 19-inch, 2U high rack-mount chassis (see Section

TP-6310 blades: regarded as a complete gateway/media server module, supporting all
necessary functions for voice, data, and fax streaming over IP networks (see Section
3.3 on page 23). The blade is supplied with a rear input/output (I/O) module referred to
as the Rear Transition Module (RTM). RTM-6310 provides the port connections to the
supported interfaces:
•
Two Gigabit Ethernet
•
PSTN Interfaces:
♦
♦

TP-8410 blades: regarded as a complete gateway module, supporting all necessary
functions for voice, data, and fax streaming over IP networks (see Section
28). The RTM-8410 provides the port connections to the supported interfaces:
•
Two Gigabit Ethernet
•
Up to 63 E1 / 84 T1

Alarm, Status and Synchronization blade (SA/M3K): provides clock synchronization
(see Section

Cooling system (see Section
•
Fan Tray module (FM/M3K)
•
Air Filter (AF/3K) located within the Fan Tray module

System alarm LEDs and ACO button (see Section

Power system, available in one of the following power types:
•
Alternating Current (see Section
♦
♦
•
Direct Current (see Section
♦
♦
Notes:
•
The device operates in either Simplex mode or High Availability (HA) mode. The
difference is that HA provides 1+1 redundancy for the voice functionality.
•
The blades and modules are supplied pre-installed in the device's chassis. For
replacing these components, see Section 6 on page 75.
•
For blade chassis slot assignment, see Section
Version 7.0
Up to three T3 interfaces, offering scalability by allowing you to start with a
single T3 interface and to later add another one or two T3 interfaces as
capacity requirements grow
1+1 STM-1/OC-3
3.5 on page 33)
3.6
Two AC Power Supply modules (PS/AC/3K) for load sharing
Two AC Power Entry modules (PEM/AC/3K)
Two DC Power Supply modules (PS/DC/3K) for load sharing
Two DC Power Entry modules (PEM/DC/3K)
3.2
on page 35):
3.7 on page 37)
3.8.1 on page 41):
3.8.2 on page 42):
3.2.2 on page 16.
13
3. Physical Description
on page 15).
3.4 on page
Mediant 3000