3.8
Power Supply
The device can be powered from one of the following power sources (depending on
customer order):
AC power source (see Section
DC power source (see Section
The power supply units provide the following features:
Load-sharing to provide necessary voltages and fail-safe operation - active current
load sharing on positive outputs (V1, V2)
Integral LED status indicators
Hot-pluggable connector, with staged pin lengths
Hot swappable
Optimized thermal management
Control and monitoring features
Note:
If you want to change the device's power system (i.e., AC to DC, or DC to AC),
you need to change the chassis. For more information, contact your AudioCodes
representative.
Hardware Installation Manual
3.8.1
on page 39)
3.8.2
on page 42)
38
Mediant 3000
Document #: LTRT-94720