Tp-8410 Blade; Figure 3-10: Tp-8410 Blade - AudioCodes Mediant 3000 Hardware Installation Manual

Notes:
•
RTM-6310 Redundancy is applicable only to HA mode.
•
RTM-6310 Redundant provides only GbE interfaces (no PSTN interfaces).
3.4

TP-8410 Blade

The TP-8410 blade is a member of AudioCodes series of TrunkPack VoP communication
platform. The blade is a high-density, hot-swappable, resource blade providing up to 63 E1
/ 84 T1 PSTN interfaces, with a capacity of up to 2,016 DS0 channels. The blade is
considered a complete gateway / media server module, supporting all necessary functions
for voice, data, and fax streaming over IP and wireless networks. The blade is housed in
the chassis front panel and has its own MAC address and IP address.
The TP-8410 blade operates together with RTM-8410 housed in the rear panel, which
provides the port connections for the following interfaces:

E1/T1 PSTN

GbE
For more information on the RTM-8410, see Section
The TP-8410 blade provides redundancy protection (HA) functionality when two blades are
installed, in which the standby blade takes over from the active blade upon failure. The TP-
8410 blade also provides an RS-232 interface port, status LEDs, and a LED Array display.
The TP-8410 blade components are shown in the figure below:
Note: The RS-232 port can be disabled for security, using the ini file parameter
DisableRS232.
Hardware Installation Manual

Figure 3-10: TP-8410 Blade

28
3.4.2 on page 32.
Document #: LTRT-94720
Mediant 3000