Tp-8410 Leds Description; Blade Operating Status Leds; Table 3-10: Blade Operating Status Leds Description - AudioCodes Mediant 3000 Hardware Installation Manual

Hardware Installation Manual
3.4.1

TP-8410 LEDs Description

The TP-8410 blade provides LEDs on its front panel, which indicates various operational
status of the blade.
3.4.1.1

Blade Operating Status LEDs

The LEDs providing operational status of the TP-8410 is described in the table below.
Label
FAIL
ACT
PWR
SWAP
READY
Version 7.0

Table 3-10: Blade Operating Status LEDs Description

Color Status
Red On Blade failure (fatal error).
- Off Normal operation.
Green On Active blade.
Note: Applicable only to the HA mode.
Yellow Blinking Redundant blade in standby mode.
Note: Applicable only to the HA mode.
- Off Standalone blade (i.e., for Simplex configuration).
Green On Blade is receiving power.
- Off No power is received by the blade.
Blue On The blade can now be fully removed or inserted.
- Off The blade has been inserted successfully.
Description
29
3. Physical Description
Mediant 3000