Internal Options/General; Figure 23: Extension Preferences - Grandstream Networks GXE5102 User Manual

INTERNAL OPTIONS/GENERAL

Global OutBound CID
Global OutBound CID Name
Operator Extension
Ring Timeout
Users could also configure the extension preference for different functions. It is recommended to keep this
feature on so the extensions could be properly arranged and used.
Firmware version 1.0.0.19
This is the default global CallerID that is used for all outgoing calls when
no other CallerID is defined. If ther "User" tab or "VoIP Trunks" tab does
not have defined CallerID neither, this Global OutBound CID will be
used for CallerID.
This is the global CallerID Name that is used for all outgoing calls. If this
value is defined, all outgoing calls will have a "CallerId Name" set to this
value. Usually this value could be your company name. Leave this value
blank if you would like to have the users' "CallerID Name" display on
outbound calls.
The operator extension is the number dialed when users press "0" to exit
Voicemail. It's also available in IVR option.
Number of seconds to ring an extension before sending to the user's
voicemail box.

Figure 23: Extension Preferences

GXE5102/5104/5108/5116 USER MANUAL Page 30 of 52