Jitter Shrink Rate
INTERNAL OPTIONS/IAX REGISTRATION
Min Reg Expire
Max Reg Expire
IAX Thread Count
IAX Max Thread Count
Auto Kill
Authentication Debugging
Codec Priority
Type of Service
Trunk Frequency
Trunk Time Stamps
INTERNAL OPTIONS/IAX SECURITY
Call Token Optional
Max Call Numbers
Max
Nonvalidated
Numbers
Call Number Limits
SIP SETTINGS/GENERAL
Realm
For
Authentication
UDP Port to Bind to
Firmware version 1.0.0.19
Configures the jitter shrink rate.
Minimum duration (in seconds) of registrations/subscriptions. The
default setting is 60.
Maximum duration (in seconds) of incoming registration/subscriptions.
The default setting is 3600.
Configures number of IAX threads.
Configures maximum number of IAX threads.
When set to "yes", the connection will be terminated if ACK for the NEW
message is not received in 2000ms. Users could also specify number (in
milliseconds) in addition to "yes" and "no".
Enables/disables IAX related debug output in log messages.
Configures codec negotiation priority to Caller, Host, Disabled or
Reqonly.
Configures ToS bit for preferred IP routing.
Configures frequency of trunk frames measured in milliseconds.
Enables/disables attaching time stamps to trunk frames.
A single IP address or a range of IP addresses for which call token
validation
is
11.11.11.11/22.22.22.22.
Limits the amount of call numbers allowed for a single IP address.
Call
Limits the amount of nonvalidated call numbers for all IP addresses
combined.
Limits the call numbers for a given IP range.
Digest
Realms MUST be globally unique according to RFC 3261. Configure this
value as your host or domain name. The default setting is \"asterisk\". If
a system name is configured in asterisk.conf, this value will be set to the
configured system name.
The default setting is 5060.
GXE5102/5104/5108/5116 USER MANUAL
not
required
in
the
form
11.11.11.11
or
Page 37 of 52