INTERNAL OPTIONS/STUN MONITOR
STUN Server
STUN Refresh
INTERNAL OPTIONS/IAX GENERAL
Bind Port
Bind Address
IAX1 Compatibility
No Checksums
Delay Reject
ADSI
Music On Hold Interpret
Firmware version 1.0.0.19
Figure 28: Hardware Configuration: Advanced Settings
Configures the STUN server to query.
Valid format:
[(hostname | IP-address) [':' port]
The default port number is 3478 if not specified.
Leave this field blank to disable STUN.
Number of seconds between STUN Refreshes. The default setting is 30
seconds.
Allows iax2 to listen to another port. The default setting is 4569.
Forces iax2 to bind to a specific address instead of all addresses. The
default setting is 0.0.0.0.
Enables/disables iax1 style compatibility.
Enables/disables checksums.
Enables/disables iax2 to delay reject of calls to avoid DOS.
Enables/disables ADSI phone compatibility.
Specifies Music On Hold class.
GXE5102/5104/5108/5116 USER MANUAL
Page 35 of 52