Sip Settings/Sip Nat - Grandstream Networks GXE5102 User Manual

TLS Bindaddr
TLS Self Signed CA
TLS Cert
TLS CA Cert
TLS CA List

SIP SETTINGS/SIP NAT

External Address
External Host
External Refresh
External TCP Port
Firmware version 1.0.0.19
default setting is "No".
IP address for TLS server to bind to (0.0.0.0: binds to all interfaces). The
default port number is 5061 if not specified.
Note:
The IP address must match the common name (hostname) in the
certificate. Please do not bind a TLS socket to multiple IP addresses.
For details on how to construct a certificate for SIP, please refer to the
following document:
http://tools.ietf.org/html/draft-ietf-sip-domain-certs
This is the CA certificate is the TLS server being connected to requires
self signed certificate, including server's public key. This file will be
renamed as "asterisk.ca" automatically.
Note:
The size of your ca file can't be larger than 2MB.
This is the Certificate file (*.pem format only) used for TLS connections.
This file will be renamed as "asterisk.pem" automatically.
Note:
The size of your certificate can't be larger than 2MB.
This file must be named with the CA subject name hash value. It
contains CA's (Certificate Authority) public key, which is used to verify
the accessed servers.
Note:
The size of your certificate can't be larger than 2MB.
The list of files under the CA Cert directory.
A static address (and port) that will be in outbound SIP messages if the
GXE is behind NAT. If it's a hostname, it will only be looked up only.
Specifies an external host, which is similar to External Address except
the hostname will be looked up every "External Refresh" interval and
Asterisk will perform DNS queries periodically.
Configures the refresh interval for the external host.
Configures the externally mapped TCP port when the GXE is behind a
GXE5102/5104/5108/5116 USER MANUAL Page 40 of 52