Table of Contents
Advertisement
SIP SETTINGS/SIP MISCELLANEOUS
Register
Register Timeout
Register Attempts
Video Max Bitrate (kb/s)
Support for SIP Video
Generate Manager Events
Reject NonMatching Invites
NonStandard G.726 Support
SIP SETTINGS/SIP SESSTION TIMER
Session Timers
Session Expires
Min SE
Session Refresher
SIP SETTINGS/SIP TLS AND TCP SETTINGS
TCP Enable
TCP Bindaddr
TLS Enable
Firmware version 1.0.0.19
Register as a SIP user agent to a SIP proxy (provider).
The interval (in seconds) for the GXE to retry registration. The default
setting is 20.
Number of registration attempts before the GXE gives up. The default
setting is 0 (keep trying until the server side accepts the registration
request).
Maximum bitrate (kb/s) for video calls. The default setting is 384.
Enables/disables SIP video support.
Generates manager events when SIP UA performs events (e.g. hold).
When rejecting an incoming INVITE or REGISTER request, always
reject with "401 Unauthorized" instead of notifying the requester that if
there is a matching user or peer for the request.
If the peer negotiates G726-32 audio, use AAL2 packing order instead of
RFC3551 packing order (this is required for Sipura and Grandstream
ATAs).
•
Originate: always request and run session-timers.
•
Accept: Run session-timers only when requested by other UA.
•
Refuse: Do not run session timers.
The default setting is "Accept".
The maximum session refresh interval (in seconds). The default setting
is 1800.
The minimum session refresh interval (in seconds). The default setting is
90.
Selects the session refresher to be UAC or UAS. The default setting is
UAC.
Enables/disables server for incoming TCP connections. The default
setting is "No".
IP address for TCP server to bind to (0.0.0.0: binds to all interfaces). The
default port number is 5060 if not specified.
Enables/disables server for incoming TLS (secure) connections. The
GXE5102/5104/5108/5116 USER MANUAL
Page 39 of 52
Advertisement
Table of Contents
