Table of Contents
Advertisement
UPGRADING GXE5102/5104/5108/5116
UPGRADE FROM NETWORK
The GXE5102/5104/5108/5116 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP
Address for the TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for
TFTP, HTTP or HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com
UPLOAD FIRMWARE LOCALLING
If there is no HTTP/TFTP server, users could also upload the firmware to the GXE5102/5104/5108/5116
directly via Web GUI. Please follow the steps below to upload firmware locally.
•
Download the latest GXE5102/5104/5108/5116 firmware file from the following link and save it in your
PC;
http://www.grandstream.com/support/firmware
•
Log in the Web GUI as administrator in the PC;
•
Go to Web GUI->Maintenance->Upgrade, Upload the firmware file by clicking on
the firmware file from your PC;
•
Click on
to start upgrading;
•
Wait until the upgrading process is done and the GXE boots up again.
Note:
Please do not interrupt or power cycle the GXE5102/5104/5108/5116 when the upgrading process is on.
Firmware version 1.0.0.19
Figure 37: Local Upgrade
GXE5102/5104/5108/5116 USER MANUAL
and select
Page 49 of 52
Advertisement
Table of Contents
