Bobbin Thread Control - Pfaff POWERLINE 2571 ME PLUS Instruction Manual

8

Bobbin thread control

.11
● Switch machine on.
● Call up the parameter display (press the button several times if necessary).
● Switch on "TE / Input" (LED lights up).
101
● Select parameter "104".
104
● Enter value "1" (bobbin thread control by stitch count).
● Scroll through to call up the following display ("TM" = Thread Monitor).
TM: 67515
● Set the number of stitches that can be sewed with a full bobbin by pressing the
corresponding function key.
Function key to select the ten thousand digit of the parameter.
Function key to select the hundred digit of the parameter
Function key to select the tens digit of the parameter.
The bobbin thread control is activated by parameter "104",
see chapter 11.04 List of Parameters.
II
1
Setting up
33