Setting The Stitch Counting Function For The Bobbin Thread Control - Pfaff Series 580 Supplement To The Instruction Manual

Setting up
4

Setting the stitch counting function for the bobbin thread control

.05
● Switch on the machine.
● Press the TE/Speed key twice to call up the parameter input function (LED on).
2x
● By pressing the corresponding +/- key select the parameter "760".
● Press the corresponding +/- key to set the number of remaining stitches, which
● Example display 5 x 200** = 1000 stitches. The setting depends among other things on
● If the TE/Speed key is pressed, the value is taken over and the machine changes into the
12
No
A 101
No
A 760
can still be sewn after recognition by the bobbin thread control function.
The selected value is multiplied by 10* or 200** and the result is the number of stitches.
the thread strength.
sewing mode.
The bobbin thread rest counter can only be used, if parameter "660" is set at
value "1" or "2".
* If for parameter 660 the value is "1", the multiplier is 10
** If for parameter 660 the value is "2", the multiplier is 200
VAL
ON
VAL
5