Pfaff POWERLINE 2571 ME PLUS Instruction Manual page 41

● If the "TE / Input" key is turned off, sewing functions for programmed sewing
can be turned on or off. If the function is turned on, the corresponding button
LED lights up:
Start backtack on/off
End backtack on/off
Raise needle position on/off
Thread trimming on/off
● To enter more program functions turn the "TE/Input" button back on
(LED lights up)
● Press the select button until the display shows seam section backtack stitch input
(backtacks that are not possible are not stitched).
3 3 3 3
The display will show the backtack stitch numbers, which can be changed as follows:
Increase number of start
backtack forward stitch-
es (A+). Value "0" = simpler
start backtack
Decrease number of start
backtack forward stitches
(A-).
Increase number of start
backtack backward stitch-
es (B+).
Decrease number of start
backtack backward stitch-
es (B-).
Raise foot position after sewing stop
on/off
Raise foot position at end of seam sec-
tion on/off
Light barrier on/off
Function on/off
Decrease number of end backtack
backwards stitches (C+)
Decrease number of end backtack
backward stitches (C-)
Decrease number of end backtack
forward stitches (D+)
Value "0" = simpler end backtack
Decrease number of end backtack
forward stitches (D-)
Input
41