Setting The Stitch Count Function (On Machines With Bobbin Thread Control By Stitch Counting) - Pfaff 521 Instruction Manual

Setting up
9 Setting the stitch count function
.10
(on machines with bobbin thread control by stitch counting)
2 x
No
9 - 10
Switch on the machine.
Select the input mode by pressing the TE/Speed key twice.
TE
No
101
3
By pressing the corresponding +/- key select the parameter "105".
TE
No
105
Set the number of stitches to be sewn with one bobbin by pressing the corresponding +/
- keys.
Conclude the input by pressing the TE/Speed key. The value entered is then stored and
the sewing mode selected.
To activate the stitch count function the value of parameter "104" must be set at
"1".
2.5 2.5
VAL
II
VAL
30 0 0 0