Switching On / Adjusting The Bobbin Thread Control With The Stitch Count Function - Pfaff 3834-14/11 Instruction Manual

Preparation
● If applicable, activate the stitch placement function and enter the value for the stitch
7
● Conclude the start backtack input.
● Call up the backtack input menu.
9 Switching on / adjusting the bobbin thread control with the stitch count
.11
function
● Switch on the machine.
● Call up the input mode.
9 - 10
position.
2.5
The input for the end backtack value is analogous to that for the start backtack. The
pedal-controlled backtack speed and the stitch placement position cannot be selected at
the end of the seam.
2.5
50
2.5
50
2.5