Neopost IJ 70 User Manual page 89

DEPARTMENT
The machine is configured by default as follows:
- With 0000 code for all departments opened by the supervisor,
- With names from D1 to D50 (optionally 200) corresponding to n° 1 to
In the no department mode, all the values are assigned to a
dummy department (D0 MISCELLANEOUS) which cannot be
accessed by the user. This department will be reset with the other
ones, when the registers are cleared. This department appears
on the printed reports.
4127389N/C
02/28/2007
To clear all the registers, select
DEPARTMENT menu:
DEPARTMENT SETUP
DEPARTMENT ON
ESCAPE RESET
Then, press
RESET
: is used to enable the department mode.
The machine is supplied with DEPARTMENT
order to use the departments, select DEPARTMENT
(using the
ON
You should then select DEPARTMENT in the main
supervisor menu to open and define the departments you
want to use (see on previous page).
50 (or 200 according to the option).
OFF
and press
OK
When this mode is activated, the
DEPARTMENT menu is displayed on
the main screen.
key ). Validate with
Supervisor Mode
ORIG0002-89/A
in the
SETUP
SUP
OK
to confirm.
; in
OFF
.
OK
89