2.
2.1 Replacement of the brush and moistening sponges
- Switch off the mailing machine;
- Separate the feeder from the mailing machine (see "Installation
- Unlock the conveyor (central blue button) and lift it;
- To remove the brush, raise it and lightly pull it.
- Install new brush by snapping the clips onto the brush holder.
- To remove the sponges, take off the metal sponge retainer.
- Replace sponges (3 required) and reinstall retainer.
116
4127389N/C
02/28/2007
GENERAL MAINTENANCE
of the automatic feeder" section);
General Maintenance
ORIG0002-116/A