Using The Embedded Web Server; Using The Local Printer Settings Utility - Lexmark MS310 series User Manual

Learning about the printer
Primary light sequence

Using the Embedded Web Server

Note: This functionality is available only in network printers or printers connected to print servers.
Use the Embedded Web Server to:
•
Check the status of the printer supplies.
•
Configure supply notifications.
•
Configure printer settings.
•
Configure network settings.
•
View reports.
To access the Embedded Web Server for your printer:
1
Obtain the printer IP address by printing a network setup page or menu settings page, and then finding the
TCP/IP section.
For more information, see
Notes:
•
An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Open a Web browser, and then type the printer IP address in the address field.
3
Press Enter.

Using the Local Printer Settings Utility

1
Access the Local Printer Settings Utility from the list of applications or the Start menu to adjust the printer
settings.
2
Save the changes using the Actions menu.
Note: To distribute the settings to other printers, save the settings in a command file.
Supplemental light sequence
"Printing a menu settings and network setup page" on page
Error message or printer status
Paper jam, remove optional tray
Paper jam, manual feeder
23.
15