Setting Up The Printer Software - Lexmark MS310 series User Manual

Additional printer setup
Warning—Potential Damage: Do not touch the USB cable, any network adapter, or the printer in the area
shown while actively printing. Loss of data or a malfunction can occur.
Use the
*
1
USB port
2 USB printer port
3 *
Ethernet port
*
4
Parallel port
5 Power switch
6 Printer power cord socket Connect the printer to an electrical outlet.
7 Security slot
*
These ports are available only in select printer models.

Setting up the printer software

Installing the printer software
1
Obtain a copy of the software installer package.
•
From the software CD that came with your printer.
•
Go to http://support.lexmark.com, and then select your printer and operating system.
2
Run the installer, and then follow the instructions on the computer screen.
3
For Macintosh users, add the printer.
Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.
1
2
3
4
To
Attach an optional wireless network adapter.
Connect the printer to a computer.
Connect the printer to a network.
Connect the printer to a computer.
Turn on or turn off the printer.
Attach a lock that will secure the printer in place.
6
5
7
18