Configuring The Solution; Accessing The Embedded Web Server; Configuring The Solution Using The Embedded Web Server; Configuring The Solution Using The Control Panel - Lexmark CS725R Integration Manual

Configuring the solution
Configuring the solution

Accessing the Embedded Web Server

1
Obtain the printer IP address. Do either of the following:
•
Locate the IP address on the printer home screen.
•
From the printer home screen, touch Settings > Network/Ports > Network Overview.
2
Open a web browser, and then type the printer IP address.
Configuring the solution using the Embedded Web Server
1
From the Embedded Web Server, click Settings > RFID.
2
If necessary, change the RFID settings.
Note: For more information, see
3
Click Save.
Configuring the solution using the control panel
1
From the home screen, touch Settings > RFID.
2
If necessary, change the RFID settings.
Note: For more information, see
3
Apply the changes.

Understanding the RFID settings

•
Retry Count—The number of times the printer reprints the page on another media when it detects that the
preceding page has an unreadable RFID tag. The default value is 0.
•
Stop On Error—The job is stopped when the printer detects an unreadable RFID tag, and then an error 44.01
appears on the printer display. The default value is YES.
Note: For more information on error messages, see
•
Mark On Error—
an unreadable RFID tag. The default value is YES.
Note: Enabling Mark on Error may reduce the print speed significantly and may speed up the printer fan
to maintain the fuser temperature.
•
Reset Tag Counters—The internal counter that records the number of successful and failed RFID encoding
jobs, and the number of printed labels that are reset.
"Understanding the RFID settings" on page
"Understanding the RFID settings" on page
is printed on the RFID media that overlays the existing print when the printer detects
"RFID media and tag command errors" on page
15.
15.
15
27.