Security Menu - Lexmark MS310 series User Manual

Understanding the printer menus
Use
Tray Renumber
Restore Defaults
Yes
No

Security menu

Set Date and Time menu
Use
Current Date and Time
Manually Set Date and Time
[input date/time]
Time Zone
[list of time zones]
Automatically observe DST
On
Off
UTC (GMT) Offset
[input time in minutes]
DST Start
[list of weeks]
[list of days]
[list of months]
[input time]
DST End
[list of weeks]
[list of days]
[list of months]
[input time]
DST Offset
[input time in minutes]
To
Restore all tray and feeder assignments to the factory default settings.
To
View the current date and time settings for the printer.
Enter the date and time.
Note: Setting the date and time using this menu automatically sets Enable
NTP to No.
Select the time zone.
Note: GMT is the factory default setting.
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note: On is the factory default setting.
Set the time offset from Coordinated Universal Time or Greenwich Mean Time.
Note: The setting applies only if you select "(UTC+user) Custom" as the time
zone.
Set the DST start time.
Note: The setting applies only if you select "(UTC+user) Custom" as the time
zone.
Set DST end time.
Note: The setting applies only if you select "(UTC+user) Custom" as the time
zone.
Set the DST offset time.
Note: The setting applies only if you select "(UTC+user) Custom" as the time
zone.
72