Daikin R410As Service Manual page 282

Si39-302
System Configuration
No. Part name
1 Central remote controller
2 Unified ON/OFF controller
3 Schedule timer
Unification adaptor for
4
computerized control
Interface adaptor for SkyAir-series # DTA102A52
5
6 Central control adaptor kit
Wiring adaptor for other air-
7
conditioner
DIII-NET
8
Expander adaptor
9 Mounting plate
Note:
Installation box for
Building management system
No. Part name
1 intelligent Touch Controller
1-1 Electrical box with earth terminal (4 Blocks)
Number of
intelligent Manager
2 units to be
ECO 21
connected
3 BACnet Gateway
DMS-IF (for use in L
4
networks)
5 Optional DIII board
6 Optional Di board
7 Optional DIII Ai unit
Parallel interface
8
Basic unit
Temperature
9
measurement units
Temperature
10
setting units
Unification adaptor for
11
computerized control
Wiring adaptor for
12-1
electrical appendices (1)
Wiring adaptor for
12-2
electrical appendices (2)
External control adaptor for outdoor
13 unit
(Must be installed on indoor units.)
Appendix
Model No.
! Up to 64 groups of indoor units (128 units)can be connected, and ON/OFF,
DCS302B61
! Up to 16 groups of indoor units (128 units) can be turned, ON/OFF individually
DCS301B61
! Programmed time weekly schedule can be controlled by unified control for up to
DST301B61
# DCS302A52 ! Interface between the central monitoring board and central control units
! Adaptors required to connect products other than those of the VRV System to
# DTA107A55
! To use any of the above optional controllers, an appropriate adaptor must be
# DTA103A51
! Up to 1,024 units can be centrally controlled in 64 different groups.
! Wiring restrictions (max. length : 1,000m, total wiring length : 2,000m, max.
DTA109A51
! Fixing plate for DTA109A51
KRP4A92
adaptor must be procured on site.
#
Model No.
Without
DCS601B51
PPD
With DCS601B51
PPD DCS002A51
KJB411A
128 units DAM602A52
192 units DAM602A53
256 units DAM602A51
512 units DAM602A51×2
768 units DAM602A51×3
1024 units DAM602A51×4
DMS502A51

W
ON ORKS
DMS504B51
DAM411A1
DAM412A1
DAM101A51
DPF201A51
DPF201A52
DPF201A53
DCS302A52
KRP2A61
KRP2A62
KRP4A51-53
DTA104A61
DAT104A62

* is a registered trade mark of Echelon Corporation.
L W
ON ORKS
temperature setting and monitoring can be accomplished individually or
simultaneously. Connectable up to "2" controllers in one system.
or simultaneously, and operation and malfunction can be displayed. Can be
used in combination with up to 8 controllers.
64 groups of indoor units (128 units). Can turn units ON/OFF twice per day.
the high-speed DIII-NET communication system adopted for the VRV System.
installed on the product unit to be controlled.
number of branches : 16) apply to each adaptor.
! Air-Conditioning management system that can be controlled by a compact
all-in-one unit.
PPD: Power Proportional Distribution function
New Functions: • Auto cool/ heat change-over •Temperature limitation
• Multilingual (English, French, German, Spanish, Italian, or
Chinese)
! Wall embeded Switch Box.
! Air conditioner management system (featuring minimized
engineering) that can be controlled by personal computers.
! Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through
BACnet communication.
! Interface unit to allow communications between VRV and BMS.
Operation and monitoring of air-conditioning systems through

L W communication.
ON ORKS
! Expansion kit, installed on the BACnet Gateway (DMS502A51), to
provide 3 more DIII-NET communication ports. Not usable
independently.
! Expansion kit, installed on the BACnet Gateway (DMS502A51), to
provide 16 more wattmeter pulse input points. Not usable
independently.
! Analog input for "sliding temperature" function (to reduce cold
shock).
! Enables ON/OFF command, operation and display of
malfunction; can be used in combination with up to 4 units.
! Enables temperature measurement output for 4 groups; 0-5VDC.
! Enables temperature setting input for 16 groups; 0-5VDC.
! Interface between the central monitoring board and central
control units
! Simultaneously controls air-conditioning control computer and up
to 64 groups of indoor units.
! To control the group of indoor units collectively, which are
connected by the transmission wiring of remote controller.
! Cooling/Heating mode change over. Demand control and Low
noise control are available between the plural outdoor units.
Function
Function
Option List
271