Daikin R410As Service Manual page 10

Si39-302
Check to see if the parts and wires are mounted and connected properly, and
if the connections at the soldered or crimped terminals are secure.
Improper installation and connections can cause excessive heat generation,
fire or an electrical shock.
If the installation platform or frame has corroded, replace it.
Corroded installation platform or frame can cause the unit to fall, resulting in
injury.
Check the grounding, and repair it if the equipment is not properly grounded.
Improper grounding can cause an electrical shock.
Be sure to measure the insulation resistance after the repair, and make sure
that the resistance is 1 Mohm or higher.
Faulty insulation can cause an electrical shock.
Be sure to check the drainage of the indoor unit after the repair.
Faulty drainage can cause the water to enter the room and wet the furniture
and floor.
1.1.4 Using Icons
Icons are used to attract the attention of the reader to specific information. The meaning of each
icon is described in the table below:
1.1.5 Using Icons List
Icon Type of
Information
Note
Note:
Caution
Caution
Warning
Warning
Reference
Caution
Description
A "note" provides information that is not indispensable, but may
nevertheless be valuable to the reader, such as tips and tricks.
A "caution" is used when there is danger that the reader, through
incorrect manipulation, may damage equipment, loose data, get
an unexpected result or has to restart (part of) a procedure.
A "warning" is used when there is danger of personal injury.
A "reference" guides the reader to other places in this binder or
in this manual, where he/she will find additional information on a
specific topic.
Introduction
ix