Daikin R410As Service Manual page 124

Si39-302
3.1.7 Centralized Control Group No. Setting
!
BRC1A Type
!
1. When in the normal mode, push the
2. Set mode No. "00" with the
3. Push the
4. Set the group No. for each group with the
5. Push the timer
6. Push the
!
!
!
BRC7C Type
1. When in the normal mode, push
2. Set mode No. "00" with
3. Set the group No. for each group with
4. Enter the selected group numbers by pushing
5. Push
BRC7C Type
Test Operation
If carrying out centralized control by central remote controller or unified ON/OFF
controller, group No. must be set for each group individually by remote controller.
Group No. setting by remote controller for centralized control
then enters the "field setting mode."
button to inspect the group No. display.
manner of 1-00, 1-01, ...,1-15, 2-00,...4-15. However, the unified ON/OFF controller
displays only the group No. within the range selected by the switch for setting each address.)
button to define the selected group No.
button to return to the normal mode.
Even if not using a remote controller, connect the remote controller when setting the group
No., set the group No. for centralized control, and disconnect after making the setting.
Set the group No. after turning on the power supply for the central remote controller, unified
ON/OFF controller, and indoor unit.
Group No. setting by wireless remote controller for centralized control
enters the "field set mode."
button and return to the normal mode.
button for 4 seconds or more, and operation
button. ∗
button (The group No. increases in the
button for 4 seconds or more, and operation then
button.
button (advance/backward).
button.
Field Setting
113