5
Copying
5.1 Placing Originals
This section describes the types of originals you use set and how to place them.
About Originals
Recommended size of originals
Scanner glass:
Unscannable image area
Even if you correctly place originals,margins of a few millimeters on all four
sides of the original may not be scanned.
Margins when using scanner glass.
Placing Originals on the Scanner Glass
1
Raise the scanner cover.
2
Place the original face down on the
scanner glass.
The original should be aligned to the
rear left corner.
no wider than 216 mm (8.5 inches)
no longer than 297 mm (11.7 inches)
Scan Area
31
2mm