Headlight Adjustment - APRILIA SR MAX 125 ie Service Station Manual

SR MAX 125 ie
BRAKING CIRCUIT FLUID IS HIGHLY CORROSIVE; DO NOT LET IT COME INTO CONTACT WITH
THE PAINTED PARTS.
WARNING
THE BRAKE FLUID IS HYGROSCOPIC, THAT IS, IT ABSORBS MOISTURE FROM THE SUR-
ROUNDING AIR. IF THE HUMIDITY IN THE BRAKING FLUID EXCEEDS A CERTAIN VALUE, IT
WILL LEAD TO INEFFICIENT BRAKING; FOR THIS REASON, NEVER USE BRAKING FLUID
FROM CONTAINERS THAT HAVE ALREADY BEEN OPENED, OR PARTIALLY USED.
Characteristic
prescribed fluid:
AGIP BRAKE FLUID DOT 4
Under normal climatic conditions, the brake fluid should be replaced following the given instructions.
NOTE
SEE THE BRAKING SYSTEM CHAPTER WITH REGARD TO THE CHANGING OF BRAKE FLUID
AND THE BLEEDING OF AIR FROM THE CIRCUITS.

Headlight adjustment

- Place the vehicle in use conditions, with tyres inflated to the prescribed pressure on flat ground at 10
m from a white screen placed in dim light.
- Make sure that the scooter axle is perpendicular to the screen.
- Turn the headlight on and check that the limit of the light beam projected onto the screen does not
exceed 9/10 of the headlight centre height from the ground and that it is not less than 7/10.
- Otherwise, adjust the right headlight by the screw
shown in the figure, which can be accessed by re-
moving the front shield connecting member.
NOTE
THE ABOVE PROCEDURE COMPLIES WITH THE EURO-
PEAN STANDARDS REGARDING MAXIMUM AND MINI-
MUM HEIGHT OF LIGHT BEAMS. REFER TO THE STATU-
TORY REGULATIONS IN FORCE IN EVERY COUNTRY
WHERE THE VEHICLE IS USED.
Maintenance
MAIN - 45