Steering Bearing Removal; Steering Fifth Wheel Track Removal - APRILIA SR MAX 125 ie Service Station Manual

SR MAX 125 ie
Removal
- Clean thoroughly and visually inspect if the com-
ponents are in good conditions.
- Check the upper steering bearing for wear.
- Check the lower steering bearing for wear.
- Visually inspect that the steering fifth wheel
tracks, the headstock and the steering tube exhibit
no scores or abnormal wear. Otherwise, replace
them.

STEERING FIFTH WHEEL TRACK REMOVAL

- Remove the steering fifth wheel tracks on the
chassis with the specific tool, following the indica-
ted procedure.
- Fit the specific tool from the lower part of the
headstock until it makes contact with the upper
track.
- Hit with force the specific tool, placing it at differ-
ent points diametrically opposed so as to remove
the upper track.
Specific tooling
020004Y Punch for removing steering bearings
from headstock
Suspensions
SUSP - 217