Inspecting The Clutch - APRILIA SR MAX 125 ie Service Station Manual

Engine
- Using a feeler dial gauge and the magnetic base, measure the bell eccentricity.
- Repeat the measurement in 3 positions (Central, internal, external).
- If faults are found, replace the bell.
Specific tooling
020074Y Support base for checking crankshaft alignment
020335Y Magnetic mounting for dial gauge
Characteristic
clutch bell inspection: Limit eccentricity.
Admissible limit eccentricity: 0.15 mm

Inspecting the clutch

- Check the thickness of the clutch mass friction material.
- The masses must not show traces of lubricants; otherwise, check the driven pulley unit seals.
NOTE
ENG - 96
SR MAX 125 ie