TAIL LIGHT BULBS
•
Hold the position light bulb holder from the specific hole on the lower side of
the shield, pull it out from its seat.
•
Remove the tail light bulb (2) and replace it with another of the same type.
•
Check the proper insertion of the bulb in the bulb holder.
CAUTION
CAREFULLY REMOVE THE POSITION LIGHT BULB HOLDER WITHOUT PULL-
ING ON THE ELECTRIC WIRES.
04_36
Headlight adjustment (04_37, 04_38)
NOTE
IN COMPLIANCE WITH LOCAL LEGISLATION, SPECIFIC PROCEDURES MUST
BE FOLLOWED WHEN ALIGNING THE LIGHTS.
04_37
104