SR MAX 125 ie
Specific tooling
020444Y Tool for fitting/ removing the driven
pulley clutch
020444Y011 adapter ring
020444Y009 wrench 46 x 55
Locking torques (N*m)
Clutch unit nut on driven pulley
Refitting the driven pulley
- Fit the clutch housing on the driven pulley paying
attention to the position of the washer indicated.
Drive-belt
- Make sure the drive belt is not damaged and does not show abnormal wear.
- Replace as indicated in the scheduled maintenance table.
45 to 50
Engine
ENG - 105