Schwinn MPower Echelon2 Service Manual page 73

b. To adjust the magnet gap, carefully place a pair of soft-jaw pliers around the outside of the resis-
tance mechanism plates, and squeeze. Make small adjustments at a time and check the gap with
the tool fit—the fit should be a slip fit with no side-to-side play. Also ensure that the flywheel
remains centered between the magnets.
2. The figures below show how to adjust the magnet gap on the various models. NOTE: DO NOT USE ANY METAL
TOOLS DIRECTLY ON THE SURFACE OF THE BRAKE CARRIAGE PLATES. DOING SO WILL DAMAGE THE COR-
ROSION RESISTANT COATING.
AC™ Performance
AC™ Sport
AC™ Performance Plus
Page 73