Heart Rate - Schwinn MPower Echelon2 Service Manual

Power
The power display field shows the Power in Watts that you are producing at the current resistance level (1 horsepower =
746 Watts). Power data only shows if there is a power sensor installed on the bike.
RPM
The RPM display field shows the current pedal revolutions per minute (RPM).

Heart Rate

The Heart Rate display field shows the heart rate in beats per minute (BPM) from the heart rate monitor (HRM). When
the computer is ON, it will search for a signal from a compatible heart rate strap for 30 seconds. During this time, the
HR symbol will flash. If a strap is detected, the HR symbol will stop flashing and remain solid while displaying the HR. If
a signal is not detected after 30 seconds, the HR symbol will disappear. The user may reinitiate the pairing process by
pressing and releasing the ON/OFF button.
Page 9