By following the enclosed instructions and maintenance schedule, you will extend the life of your bikes and help ensure
the equipment will function properly during use.
Before working on this equipment, pay attention to the following warnings:
•
Read and understand the complete Owner's Manual.
•
Keep Owner's Manual for future reference.
•
Read and understand all warnings on this machine. If at any time the Warning stickers become loose, unread-
able or dislodged, contact Customer Service for replacement stickers.
•
Keep children away from this machine. Monitor them closely when near the machine. Parts that move and ap-
pear dangerous to adults can appear safe to children.
•
Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your
chest, become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the
values calculated or measured by the machine's computer for reference purposes only.
•
Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition.
Monitor the Seat, Pedals, and Crank Arms closely. Contact Customer Service for repair information.
•
Maximum user weight limit: 350lbs. (159kgs). Do not use if you are over this weight.
•
Do not wear loose clothing or jewelry. This machine contains moving parts.
•
Set up and operate this machine on a solid, level, horizontal surface.
•
Do not step off the machine until the Pedals have fully stopped. Use the Resistance Adjustment Knob to slow
the Pedals to a controlled stop before you step off the machine.
•
Do not operate this machine outdoors or in moist or wet locations.
•
Keep at least 19.7"(0.5m) on each side of the machine clear. This is the recommended safe distance for access
and passage around and emergency dismounts from the machine. Keep third parties out of this space when
machine is in use.
•
Do not over exert yourself during exercise. Operate the machine in the manner described in this manual.
•
When the machine is put in a studio or club environment, it can only be used in areas where access and control
of the machine is managed by approved staff. The degree of management depends on the user's ability to rec-
ognize and prevent danger to third parties during the exercise movement.
Tools Required
The tool list below is needed to repair and perform preventative maintenance on all Schwinn bikes.
•
PEDAL WRENCH
•
CRANK ARM REMOVAL TOOL
•
ISIS DRIVE BB TOOL (BBT-18)
•
SMART RELEASE REMOVAL TOOL
•
CRANK ARM REMOVAL TOOL
•
3/8 DRIVE RATCHET (QTY 2)
•
3/8 DRIVE EXTENSION (3 INCHES)
•
14MM SOCKET 3/8 DRIVE
•
15MM SOCKET 3/8 DRIVE
•
21MM OPEN ENDED WRENCH
•
LONG PHILLIPS SCREW DRIVER
•
STANDARD PHILLIPS SCREW DRIVER
•
½ DRIVE RATCHET
•
3MM T HANDLE ALLEN HEAD
•
26MM SOCKET ½ DRIVE SOCKET
•
5/16 ALLEN HEAD SOCKET 3/8 DRIVE
•
17MM OPEN ENDED WRENCH
•
5/32 ALLEN HEAD SOCKET 3/8 DRIVE
•
14MM OPEN END/BOX END WRENCH
•
6MM ALLEN HEAD SOCKET 3/8 DRIVE
•
8MM ALLEN HEAD SOCKET 3/8 DRIVE
•
10" CRESCENT WRENCH
•
CHAIN WEAR INDICATOR
•
TEFLON SPRAY
•
WHITE LITHIUM GREASE
Page 2