Schwinn MPower Echelon2 Service Manual page 65

Checking to see if magnet cap is rotating:
1. Remove the use right side sweat guard using a phillips screwdriver.
2. Remove the power sensor using a 3/32"allen key.
3. Attempt to turn the magnet cap located over the nut of the main brake carriage bolt as shown below.
4. If magnet cap is rotating and 740-9098 "F-Screw ASSY, W-Magnet, M10 Shoulder, AC Bike Brake" must be in-
stalled:
a. Use a phillips screwdriver to remove the three
(3) screws securing the user left side sweat
guard to the frame of the bike. Repeat this
step for the user right side sweat guard.
Page 65