Schwinn MPower Echelon2 Service Manual page 56
Console
Hide thumbs
Also See for MPower Echelon2:
- Installation manual (34 pages) ,
- Owner's manual (28 pages) ,
- Assembly manual (14 pages)
Table of Contents
Advertisement
Checking ID number:
1.
Enter Service Mode again by pressing and holding the STAGE and AVG/MAX buttons.
2.
Scroll to the "SYSTEM" menu by pressing the AVG/MAX button. Then press the LIGHT button to enter the system
sub-menu.
3.
Press the AVG/MAX button to scroll in the system sub-menu until "SERIALNUM" is displayed. The number dis-
played below "SERIALNUM" is the console ID.
Changing ID number:
1.
Enter Service Mode again by pressing and holding the STAGE and AVG/MAX buttons.
2.
Scroll to the "SYSTEM" menu by pressing the AVG/MAX button. Then press the LIGHT button to enter the system
sub-menu.
3.
Press the AVG/MAX button to scroll in the system sub-menu until "SERIALNUM" is displayed.
4.
Push and hold the STAGE and AVG/MAX buttons at the same time until a new ID number is assigned.
Page 56
Hide quick links:
Advertisement
Table of Contents
