Firm Registration - Canon imageFORMULA DR-M160 Service Manual

1. Firm Registration

This mode saves scanner firmware on a
computer for servicing in advance, making it
possible to correctly perform actual firmware
updates.
Operation Procedure
1) On the initial screen, select [Firm
Registration]. Or, select [Registration of
Firm] form the scanner in the task bar of
the initial screen or other screens.
Figure 5-239
2) The following screen is displayed only if
there are no firmware already registered.
Select [OK].
COPYRIGHT © CANON ELECTRONICS INC. 2011
CHAPTER 5 TROUBLESHOOTING
3) The firmware registration screen is
displayed. Select [Register].
4) When
displayed, select the file.
Note: The file format is "mot". The file name
can be changed to anything.
5) The firmware is automatically registered.
The "Product Name" and "Firmware
version" are displayed on the firmware
registration screen.
CANON DR-M160 FIRST EDITION
Figure 5-240
Figure 5-241
the file selection screen is
5-25