Manual Shading; Firm Load - Canon imageFORMULA DR-M160 Service Manual

CHAPTER 5 TROUBLESHOOTING

2. Manual Shading

This mode is used to change the color of
the image depending on the user conditions
even if regular automatic shading adjustment
and light adjustment using the service tool
are performed. You should not normally use
this.
Operation Procedure
1) Select [Manual Shading] to display the
setting screen. The initial values are all
"0".
Figure 5-237
2) Set the adjustment value by moving the
slide bar. The set values are displayed.
The adjustable settings are gray, red,
green, and blue for each of the front and
back sides.
3) After setting, select [Set].
Select [Initial Values] to return to [0].
Select [Cancel] to return to the values
before changing.
4) Actually scan a document and check the
image.
5-24
E. Firm Load
There are two methods for updating the
firmware: One is to select and execute
pre-registered firmware, and the other is to
select and execute firmware saved on the
computer.
pre-registration makes it possible to store all
of the firmware within the same folder and
attach comments to firmware, and is easy to
manage.
Note: For details on firmware updates, refer
COPYRIGHT © CANON ELECTRONICS INC. 2011
The methods
Figure 5-238
also to the separately issued service
information.
CANON DR-M160 FIRST EDITION
using