Get Status; Last Error Logs - Canon imageFORMULA DR-M160 Service Manual

2) After setting
conditions and placing the appropriate
paper, select [Feed Test] to start feeding.
Select [Feed Test] again to stop the
motor.
Note: For the feed test, you should set the
feed motor and main motor operation
conditions the same. Otherwise, it will
not operate correctly.
COPYRIGHT © CANON ELECTRONICS INC. 2011
the motor operation
CANON DR-M160 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
C. Get Status

1. Last Error Logs

Displays the 8 most recent error codes
and the time they occurred.
Figure 5-230
The details of the error codes are shown
below. Note that since not all errors are
displayed and the first detected error code is
displayed, the details that are displayed may
differ from the problem that you see
occurring.
For example, if the front reading unit
cable is not connected, E054 is not
displayed but E036 and E041 are displayed
as the error that are processed first.
5-19