Canon imageFORMULA DR-M160 Service Manual page 75

33 Firm Load
34 Firmware
version/Note:
35 Registerd Firm Load
36 Firm Load
37 Check Device
38 Analog
39 Regist Sensor
40 Door Open Sensor
41 USS
42 Front Unit
43 Extended Setting
44 Regist
Adjustment
45 Virtical Scaling Rate
control
46 (Scanning Modes)
47 Zoom
48 Scan (button)
49 Regist Adjustment
50 Firm Registration
51 Register
52 Delete
53 Add Note
54 Application information
55 Simulation mode
COPYRIGHT © CANON ELECTRONICS INC. 2011
Displays and selects the content of registered firmware.
Changes the registered firmware.
Selects and changes unregistered firmware.
Displays the current firmware version.
Operates the registration sensors (pre and post) and
displays data.
Operates the door sensor and displays data.
Operates the ultrasonic sensor and displays data.
Operates the document sensor and displays data.
Manual Manually adjusts the current registration adjustment
value.
Manually adjusts the reduction ratio in the feed
direction.
Selects the various scanning parameters.
Enlarges the displayed image.
Executes a scan.
Automatically adjusts the reading start position.
Registers firmware.
Deletes registered firmware.
Adds remarks to the registered firmware.
Displays the service tool (EXE file) version.
Executes simulated operation without connecting to the
scanner.
Table 5-201b
CANON DR-M160 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
5-5