Related Manuals for Canon imageFORMULA DR-M1060II
Summary of Contents for Canon imageFORMULA DR-M1060II
- Page 1 User Manual • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
- Page 2 If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Park, Melville, NY 11747, U.S.A. Tel. No. (800)652-2666 RADIO INTERFERENCE REGULATIONS (For 120 V models)
- Page 3 This is not an exhaustive list. No part of this publication may be reproduced or transmitted in any Canon is not responsible for how this scanner is used by an individual. form or by any means, electronic or mechanical, including...
- Page 4 CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL. CANON ELECTRONICS INC. IS NOT LIABLE FOR THE STORAGE AND HANDLING OF DOCUMENTS SCANNED WITH THIS PRODUCT, OR THE STORAGE AND HANDLING OF RESULTING SCANNED IMAGE DATA.
-
Page 5: Introduction
Introduction Thank you for purchasing the Canon imageFORMULA DR-M1060II Hint Document Scanner. The User Manual is installed with the software as electronic manuals Please read the following manuals carefully and familiarize yourself in the following location. with the functions of the scanner before use to ensure you sufficiently understand the functions and make the most of the scanner’s... -
Page 6: Symbols Used In This Manual
Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the scanner safely, always pay attention to these warnings. -
Page 7: Table Of Contents
Table of Contents Introduction ................. 5 Maintenance ..........46 Symbols Used in This Manual............6 Daily Maintenance ............46 Cleaning the Scanner............46 Before Using the Scanner......8 Cleaning the Inside of the Scanner ........46 System Requirements of Software....... 8 Cleaning the Sensor Glass and the Rollers ...... -
Page 8: Before Using The Scanner
CPU: Intel Core 2 Duo 1.66GHz or faster For details, consult your local authorized Canon dealer. Memory: 1 GB or more • Scanning speeds are lower if your computer’s standard USB... -
Page 9: Turning The Power On
Turning the Power ON The power of the scanner can be turned ON and OFF with the power When the scanner is properly connected to the computer, the button on the front of the scanner. (CaptureOnTouch) icon appears on the taskbar as follows. Make sure that the scanner and computer are connected properly. -
Page 10: Important Safety Instructions
If you have any questions regarding the power supply, contact your Avoid locations where a considerable amount of dust accumulates local authorized Canon dealer or service representative for further as dust may adversely affect the inside of the scanner. information. -
Page 11: Moving The Scanner
Then, contact your local authorized Canon dealer or service representative to have the unit serviced. -
Page 12: Disposal
OFF, and safe operation, follow the instructions of the warning carefully. disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced. Disposal Do not install the scanner in a humid or dusty location. -
Page 13: Features Of The Scanner
Features of the Scanner The main features of the DR-M1060II document scanner are Full Auto Mode described below. A Full Auto Mode is provided in CaptureOnTouch to allow scanning Highly Efficient Scanning with A3 Compatibility under automatically determined conditions. Scanning conditions The front-side input/output U-turn path design allows smooth such as the color mode and page size are set automatically based feeding and output of documents. - Page 14 Skip Blank Page Function Hint The scanner is equipped with a Skip Blank Page function that Some functions may not be available depending on the software you enables you to scan a document without storing images of blank are using. pages, regardless of whether each page of the document is two- sided or one-sided.
-
Page 15: Names And Functions Of Parts
Names and Functions of Parts Front View (With the Feed Tray Open) A Eject Support G Eject Stopper Open this when scanning documents that are 150 mm (A5 Raise this to stop the leading edge of ejected documents and horizontal) or longer. prevent them from falling off of the scanner. - Page 16 C USB Connector The power button lights or flashes as follows depending on the scanner status. Connect the supplied USB cable to this connector. D Power Connector Power Button Indication Description Connect the supplied AC adapter to this connector. Power is on Flashing Sleep mode Operating Panel...
- Page 17 Displayed Error Codes When a scanning error occurs, the following error codes are displayed in the Job No. Indicator. : displayed when the upper unit is open. : displayed when a paper jam is detected. : displayed when a double feed is detected while scanning. : displayed when skewed documents, staples, or feed errors are detected.
-
Page 18: Basic Operation
Basic Operation Documents The scanner can scan documents ranging in size from business cards IMPORTANT to A3. (Up to A1 size is possible with folio scanning in Long Document The documents to be scanned must satisfy certain criteria. Read the mode.) The document sizes that this scanner can scan are shown following items carefully. - Page 19 • Laminated documents may not be scanned correctly, depending Card (plastic) on the document. Size: 54 mm x 86 mm (2.1" x 3.4") (ISO standard) • It is recommended that thin documents be fed one page at a time. Card thickness: 0.76 mm (0.03") or less, 1.4 mm (0.055") or •...
-
Page 20: How To Place Documents
How to Place Documents Standard feeding is used to feed documents one page at a time. Non Switching the Feed and Eject separation feeding is used to feed bound or fastened multi-page documents or folded documents without separating them. Methods Feed and Eject Methods for Different Document Types Switch the feed and eject methods based on the type of document you are scanning. -
Page 21: Placing Documents
Placing Documents Switch the eject method based on the type of document you are scanning. Ordinarily, you should scan with the straight path tray at the rear Switch the feed method based on the type of document of the scanner closed (U-turn path). you are scanning. - Page 22 When scanning documents longer the LTR horizontal (216 mm), Place the document. extend the feed support and eject support extensions. Adjust the document guides to fit the width of the After placing the document, align the document guides with both edges of the document.
-
Page 23: Placing Cards
• After you finish scanning, close the document feed tray, document Adjust the document guides to fit the width of the card to eject extension support, and straight path tray to prevent damage to the scanner while it is not being used. be scanned. -
Page 24: Setting The Long Document Mode
Hint Fold the document in half. • The front side of the folded document will appear on the left side of Crease the document firmly down its center to fold the document the combined image. in half. Fold the document so that its edges are neatly aligned. If •... -
Page 25: Detecting A Document Double Feed
Click [OK]. privileges. Detecting a document double feed Click the Start button, and then click [Canon DR-M1060II], This scanner includes a function to detect document double feeds. By and [Canon imageFORMULA Utility]. using this function, the scanner will automatically stop when it detects imageFORMULA Utility starts. - Page 26 What to do when a double feed is To use the double feed detection ignore function, open detected the [Others] tab and select the [Rapid recovery system] When not using the double feed detection ignore function check box. If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected.
-
Page 27: Detecting Skewed Documents
When using the double feed detection ignore function Buttons of Buttons of If a document double feed is detected during scanning, document [Rapid Recovery Operating Description feeding stops when the double fed documents are ejected. The System] Screen Panel following error code is displayed in the Job No. Indicator of the Saves the preview image as a operating panel, and the DFR button lights. - Page 28 When a skewed document is detected Select the [Skew Detection] check box. Feeding automatically stops when a skewed document is detected during scanning. The following error code is also displayed in the Job No. Indicator of the operating panel. Skew detection error code Click the [OK] button to close the settings screen.
-
Page 29: Detecting Staples And Feed Errors
Detecting Staples and Feed Errors Click the [OK] button and close the settings screen. This scanner includes a function that can detect documents that are Place the document as described in “Placing stapled together and a function that can detect feed errors. Documents”... - Page 30 Hint • When [Rapid recovery system] is enabled in the [Others] tab of the scanner driver settings screen, the following screen appears instead of the above message screen. In such cases, place the document again, and then click [Yes] to resume scanning. •...
-
Page 31: Scanning Methods
Scanning methods Scanning with CaptureOnTouch What is CaptureOnTouch? CaptureOnTouch is a scanning application that enables you to scan a document with a simple operation merely by selecting the screen panel. For details about the operations and functions, see the help of CaptureOnTouch. -
Page 32: Setting The Scanner Driver
Setting the Scanner Driver When you load the driver for the first time, the selected scanner and a [Basic] tab dialog for selecting the default paper size are displayed. Hint • These settings will apply when [Default] is clicked in the ISIS driver dialog box. - Page 33 Adjust the brightness and contrast of scanned images. Hint In addition, you can also click [Gamma] and set the gamma correction Depending on the ISIS compatible application, the application may value for scanned images. have its own screen for setting scanning conditions. If the scanner [Image processing] tab driver is opened in such an application, setting items related to the functions provided by the scanner driver other than scanning...
-
Page 34: Setting Basic Scanning Conditions
[Others] tab Setting Basic Scanning Conditions This section provides an overview of the basic setting items that are the minimum requirements when configuring the scanner settings. Confirming Basic Conditions for Scanning When you scan a document, make sure you confirm the [Color mode], [Page Size], [Dots per inch], and [Scanning Side] basic conditions in the Basic settings dialog box. - Page 35 • [Detect automatically] detects whether the document is in color, Dots per inch grayscale, or black and white. You can configure advanced settings Select the scanning resolution. related to the detection method by clicking [Setting]. For details, see the Help. Page Size Select the page size that matches the document to be scanned.
- Page 36 Scanning Side • When [Speed priority] is selected, a 400-/600-dpi image is generated from the image scanned at 300 dpi. The scanning speed will be Select which of the sides of the document to scan. faster, but the quality will be slightly reduced. •...
- Page 37 Specifying the Scan Area Configuring Scanner Settings According to Purpose Configure the following settings when you want to specify the area of the document to be scanned. Set the scanning conditions according to the scanning purpose. Specifying an area When you want to delete the images of the blank pages in Specify the area of the document to be scanned in the Scan Area two-sided documents dialog box, which is opened from the [Area] button on the [Basic] tab.
- Page 38 When you do not want to scan colored lines and text When you want to enhance contours in images Specify the color (red, green, blue, all colors) to be ignored (dropped Adjust the edge emphasis setting on the [Image processing] tab. out) in the color drop-out settings on the [Image processing] tab, and that color will be removed from the scanned image.
- Page 39 When you want to enhance text that is difficult to read When you want to detect multiple pages fed at the same because of factors such as the background of the time scanned document Select the [Double Feed Detection] check box on the [Feeding] tab. You can enable either one or both of [Detect by Ultrasonic] and Select [Advanced Text Enhancement] or [Advanced Text [Detect by Length].
- Page 40 When you want to match the orientation of images to the When you want to use batch separation for scanning text when scanning a mixture of pages with different text When you want to divide and scan a document, you can separate a orientations batch at the timing with which each next document is placed and scanned.
- Page 41 A When you want to specify different scanning conditions for the front When [Patchcode] is set, batch separation can be performed by using a patchcode. (See p. 44) and back pages of a document, select [Skip Blank Page] or [Both] When [Blank Page] is set, batch separation is performed when an for [Scanning Side] on the [Basic] tab in advance.
- Page 42 To scan barcodes • Select the [Erase Notch] check box to remove notches that protrude from object outlines in scanned images. Click the [Barcode] button on the [Others] tab to configure barcode scanning conditions. When you want to save a scanner driver setting When you finish configuring a setting, click the [Save] button of [User Preference] to save the setting.
- Page 43 Function Restrictions Depending on Mode Setting Some of the setting items in each of the driver tabs are disabled as follows depending on the setting for [Color Mode] on the [Basic] tab. [Brightness] tab [Others] Tab Setting value Contrast Setting value Prescan Detect Automatically Detect Automatically...
-
Page 44: More Advanced Scanning Methods
Print patchcode with a printer. functions by using patchcodes. By tucking patchcode sheets supplied with this scanner into a Click [Start] – [Canon DR-M1060II] and then select [Patchcode] document and scanning it, the scanner can automatically separate from the menu. - Page 45 IMPORTANT Open the scanner driver settings screen and select • Patchcodes must be printed in their normal size. If patchcodes [Patchcode] in [Batch Separation] on the [Others] tab. are enlarged or reduced, they may not be recognized correctly. • When copying provided patchcodes to create different sized patchcodes, ensure that the patchcode fits inside the effective range shown in the following diagram.
-
Page 46: Maintenance
Maintenance Daily Maintenance Clean the scanner on a regular basis, as described below, to maintain Cleaning the Inside of the Scanner peak scanning quality. Dust or paper particles inside the scanner may cause lines or CAUTION smudges to appear on scanned images. Use a dry cloth, for example, •... - Page 47 Be sure to allow sufficient cooling before performing cleaning or replacement. IMPORTANT Scratches on the sensor glass may cause marks on the images, as well as feeding errors. If there are scratches on the sensor glass, contact your local authorized Canon dealer or service representative.
- Page 48 Clean the rollers. Wipe the removed rollers with a cloth that has been dampened with water and thoroughly wrung out. Clean the rollers while turning them. Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, and then use a clean, dry and soft cloth to wipe away any moisture.
-
Page 49: Adjusting The Reduction Ratio
Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [Canon DR-M1060II], and [Canon imageFORMULA Utility]. Click [OK] to close the scanner properties. imageFORMULA Utility starts. -
Page 50: Replacing Consumable Parts
Replacing Consumable Parts Raise the OPEN lever, and open the upper unit. The feed roller and retard roller are consumable parts. The feed roller and retard roller wear with scanning. If the feed roller and retard roller are worn, documents may not feed correctly and paper jams and double feeds may occur. - Page 51 Replacing the Retard Roller Close the upper unit by gently pushing down on the left TEMPERATURE WARNING and right sides. Push until it clicks into place to make sure that it is completely closed. The inside of the scanner can become very hot after continuous operation.
- Page 52 Remove the retard roller. Press the roller cover to close it. Replacing the Feed Roller Install the new retard roller. Lift the securing lever for the feed roller forward. Slide the securing lever for the retard roller to the right, and lower it backward.
- Page 53 Lower the feed roller toward you while removing it from Attach the left side of the feed roller, and slide the the left. securing lever for the feed roller to the right. Remove the feed roller. Raise the feed roller toward the back until the securing lever clicks into place.
- Page 54 Resetting the counter Click [Reset]. Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [Canon DR-M1060II], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. Click [Canon DR-M1060 USB] and click [Properties]. The counter for [Current Rollers] resets.
-
Page 55: Auto Power Off Setting
To disable this setting, follow the procedure below. Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [Canon DR-M1060II], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. Click [OK] to close the scanner properties. -
Page 56: Troubleshooting
(3) The computer’s USB interface may not support the be solved by cleaning, the internal glass may be scanner. The scanner cannot be guaranteed to scratched. Contact your local authorized Canon dealer. work with all USB interfaces. (4) Confirm that the supplied USB cable is used to Problem 6 Pages are missing. - Page 57 Problem 8 Multiple pages of scanned images cannot be saved Problem 11 Memory becomes insufficient and scanning stops. to a single file. Solutions If you configure scanning conditions that use a large Solutions Depending on the file format, multiple scanned image amount of the computer’s memory, scanning may stop pages cannot be saved as a single file with because of insufficient memory.
-
Page 58: Software Troubleshooting
Software Troubleshooting This section describes troubleshooting problems and solutions for operating the supplied software (CaptureOnTouch). If scanning is too slow (1) Close other running programs, if any. (2) Scanning can be slowed down by memory shortage caused by memory-resident applications such as anti-virus programs. Close such memory-resident programs if necessary to free up memory space. -
Page 59: Useful Tips
Useful tips Here are some useful tips for scanning documents. Click the [Detail Settings] button on this screen. You can set the file names of scanned images by setting all or some of the three items Where are scanned images saved? Can the save destination be shown below. - Page 60 What is the best way to scan business cards or photos? Set [Page Size] to [Match original size] on the scanner driver setting screen, then scan. Alternatively, register the size of the cards or photos to be scanned. For details, see p.
-
Page 61: Clearing Paper Jams, Skewed Documents, Stapled Documents, And Feed Errors
Clearing Paper Jams, Skewed Documents, Stapled Documents, and Feed Errors When paper jams and skewed documents are detected during Raise the OPEN lever, and open the upper unit. scanning, the following error codes are displayed in the scanner’s display panel and scanning is interrupted. Paper jam error code Skew, staple, or feed error detection error code When a paper jam or double feed occurs during scanning, use the... - Page 62 Remove the jammed document. Close the upper unit by gently pushing down on the left and right sides. Push until it clicks into place to make sure that it is completely closed. TEMPERATURE WARNING The inside of the scanner can become very hot after continuous After removing the jammed paper, check to see if the last page operation.
-
Page 63: Uninstalling The Software
Uninstalling the Software If the ISIS/TWAIN driver, CaptureOnTouch is not operating normally, follow the procedure below to uninstall them. Then, re-install the software. See Setup Guide. IMPORTANT Log on to Windows as an Administrator. From the Windows task bar, click Start button click [Windows System] ... -
Page 64: Appendix
Appendix Specifications Main Unit Eject method: Straight path only Card Type Desktop sheetfed scanner Size: 54 mm x 86 mm (2.2" x 3.4") (ISO standard) Scanning Document Size Card thickness: 0.76 mm (0.03") or less, 1.4 mm (0.055") or less Plain Paper for the embossment Size... -
Page 65: Replacement Parts
Exchange roller kit (product code: 9691B001) Kit to replace the rollers (feed roller unit, retard roller). • For the replacement procedure, see “Replacing Consumable Parts” on p. • Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts. -
Page 66: About The Flatbed Scanner Unit
About the Flatbed Scanner Unit Dimensions The optional Flatbed Scanner Unit can be connected to and used with this scanner. System requirements The computer must comply with the necessary system requirements of Flatbed Scanner Unit. 246 mm The scanner driver of Flatbed Scanner Unit needs to be installed to (9.7") use the unit. -
Page 67: Index
Index Numerics 2D code ..................14 Reset Counter ................54 Rollers Adjusting the Reduction Ratio ............ 49 Cleaning ................46 Auto Power Off Setting ............... 55 Replacing ................50 Barcode ................14 Scanner Driver Basic Settings ..............34 CaptureOnTouch ................ 31 Configuring Settings According to Purpose ...... - Page 68 For more information regarding return and recycling of WEEE your household waste, according to the WEEE Directive (2012/19/EU) products, please visit www.canon-europe.com/sustainability/ and national legislation. This product should be handed over to a approach/. designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE).
- Page 69 Bedingungen abgegeben werden. Rifiuti di Apparecchiature Elettriche ed Elettroniche, consultare la Als Endbenutzer und Besitzer von Elektro- oder Elektronikgeräten Direttiva RAEE, rivolgersi alle autorità competenti, oppure visitare il sind Sie verpflichtet: sito www.canon-europe.com/sustainability/approach/. • diese einer vom unsortierten Siedlungsabfall getrennten Erfassung zuzuführen,...
- Page 70 RAEE (2012/19/ apparatuur naar www.canon-europe.com/sustainability/approach/. UE) y con la legislación nacional. Este producto debe entregarse en uno de los puntos de recogida designados, como por ejemplo, entregándolo en el lugar de venta al comprar un producto similar o...
- Page 71 Du finner mer informasjon om retur og resirkulering av WEEE- hantera elektrisk och elektronisk utrustning (EE-utrustning) eller hos produkter på www.canon-europe.com/sustainability/approach/. handlare som är auktoriserade att byta in varor då nya, motsvarande köps (en mot en). Olämplig hantering av avfall av den här typen kan ha en negativ inverkan på...
- Page 72 Αυτό το προϊόν πρέπει να παραδίδεται σε καθορισμένο σημείο wywozem odpadów domowych. Więcej informacji o zwracaniu i συλλογής, π.χ. σε μια εξουσιοδοτημένη βάση ανταλλαγής όταν recyklingu zużytego sprzętu elektrycznego i elektronicznego znajduje αγοράζετε ένα νέο παρόμοιο προϊόν ή σε μια εξουσιοδοτημένη θέση się w witrynie www.canon-europe.com/sustainability/approach/.
- Page 73 (OEEZ) a podľa platnej връщането и рециклирането на продукти от излязло от употреба legislatívy Slovenskej republiky sa tento produkt nesmie likvidovať ЕЕО посетете www.canon-europe.com/sustainability/approach/. spolu s komunálnym odpadom. Produkt je potrebné odovzdať do určenej zberne, napr. prostredníctvom výmeny za kúpu nového podobného produktu, alebo na autorizované...
- Page 74 (AEE). La manipulació inadequada d’aquest tipus de residus podria OEEO, obiščite www.canon-europe.com/sustainability/approach/. tenir un impacte negatiu en l’entorn i en la salut humana, a causa de les substàncies potencialment perilloses que normalment estan associades als AEE.
- Page 75 Per a més informació sobre la devolució i el reciclatge de productes atkritumu savākšanas atbildīgo dienestu, pilnvarotu EEIA struktūru vai RAEE, visiteu www.canon-europe.com/sustainability/approach/. sadzīves atkritumu apsaimniekošanas iestādi. Lai saņemtu plašāku informāciju par elektrisko un elektronisko iekārtu nodošanu pārstrādei, apmeklējiet tīmekļa vietni...
- Page 76 Za više informacija o tome gde možete da predate vašu staru opremu radi recikliranje, molimo Vas da kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću. Za više informacija o vraćanju i recikliranju WEEE proizvoda, posetite stranicu www.canon-europe.com/sustainability/approach/.
- Page 77 Safety-related markings on the machine Marquages de sécurité sur la machine Marcature di sicurezza sulla macchina Sicherheitshinweise auf der Maschine Marcas de la máquina relacionadas con la seguridad Veiligheidsmarkeringen op de machine Makine üzerindeki güvenlik i aretleri [English] Switch (On) Power on [Français] Commutateur (Marche)
- Page 78 [English] Switch (Push-On/Push-Off) Power on/off (no standby current) [Français] Commutateur (Appuyer pour Sous/hors tension (pas de courant de veille) mettre en marche/Appuyer pour arrêter) [Italiano] Interruttore a pulsante Alimentazione on/off (nessuna corrente di standby) bistabile (On/Off) [Deutsch] Schalter (Ein- und Ausschalten Ein- und Ausschalten (ohne Ruhestromaufnahme) durch Drücken) [Español]...
- Page 79 [English] DC symbol Indicates direct current [Français] Symbole CC Indique qu’il s’agit de courant continu [Italiano] Simbolo corrente continua (C.C.) Indica la corrente continua Kennzeichnet Gleichstrom [Deutsch] Gleichstrom-Symbol [Español] Símbolo CC Indica corriente continua Geeft gelijkstroom aan [Nederlands] DC-pictogram [Türkçe] DC sembolü...
- Page 80 CANON ELECTRONICS INC. 3-5-10 SHIBAKOEN, MINATO-KU, TOKYO 105-0011, JAPAN CANON U.S.A. INC. ONE CANON PARK, MELVILLE, NY 11747, U.S.A. CANON CANADA INC. 8000 Mississauga Road Brampton, Ontario L6Y 5Z7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59, 1185 XB AMSTELVEEN, THE NETHERLANDS CANON AUSTRALIA PTY.