Scanning - Canon imageFORMULA DR-M160 Service Manual

CHAPTER 1 GENERAL DESCRIPTION

2. Scanning

This section describes how to scan
using [Scan First] in CaptureOnTouch.
Note: CaptureOnTouch is TWAIN compatible
application software.
1) Start CaptureOnTouch.
Double-click the CaptureOnTouch icon in
the task bar to start CaptureOnTouch.
Figure 1-305
2) When the main screen is displayed, click
[Scan First].
Figure 1-306
1-8
3) Set the scanning method.
Note: In
4) Click the Start button to start the scan.
5) The scanned image is displayed on the
screen. Once you have finished, click the
[Next step] button.
COPYRIGHT © CANON ELECTRONICS INC. 2011
this example,
continuous scanning: ON] and [Scans
in the full auto mode: ON].
Figure 1-307
Figure 1-308
Figure 1-309
CANON DR-M160 FIRST EDITION
set [Enable