Canon imageFORMULA DR-M160 Service Manual page 74

CHAPTER 5 TROUBLESHOOTING
A list of the modes is show below.
No. Component/display name
1 Main Menu
2 Regist Adjustment
3 Light Adjustment
4 Max Document Size
5 Sleep
6 Double Feed Setting
7 Firm Load
8 Counter
9 Dcon Check
10 CIS Led
11 Panel Led
12 Clutch
13 Feed Unit
14 Front Unit
15 Panel Unit
16 Feed Test
17 Feed Motor
18 Main Motor
19 Get Status
20 Last Error Logs
21 Check Device
22 Serial Number
23 Sleep Time
24 Long Document
25 Count
26 Write setting to text
27 Scan Check
28 Front Page
29 Back Page
30 (Scanning Modes)
31 Zoom
32 Scan (button)
5-4
Automatically adjusts the reading start position.
Automatic fine tunes the shading compensation value.
Selects the long document mode.
Selects the time before entering sleep mode.
Selects the number of retries after detecting a double feed.
Changes the general firmware.
Displays and changes counters such as the total
scanning count and part replacement counters.
Checks the reading unit LED light.
Checks the operating panel LED light.
Checks the operation of the separation clutch.
Checks detection by the sensors in the feed unit.
(Registration/double feed sensor)
Checks detection by the sensors in the front unit.
(Document sensor)
Checks whether the operating panel keys are ON or
OFF.
Checks the overall operation of feeding documents.
Checks the operation of the feed motor.
Checks the operation of the main motor.
Displays up to the 8 most recent error codes that have
occurred.
Displays the internal firmware version.
Displays and sets the serial number of the main body.
Displays the sleep time setting.
Displays the long document mode (maximum length)
setting.
Displays the counters.
Saves the above information on the computer.
Displays the scanned image (front surface).
Displays the scanned image (back surface).
Selects the various scanning parameters.
Enlarges the displayed image.
Executes a scan.
Table 5-201a
COPYRIGHT © CANON ELECTRONICS INC. 2011
Function
CANON DR-M160 FIRST EDITION