How To Start And Finish - Canon imageFORMULA DR-M160 Service Manual

3. How to Start and Finish

How to start
1) Start the computer for servicing.
2) If an icon of
displayed on the task bar, click the icon
to terminate it.
Note: Refer to the "User Manual" for the
details of
CaptureOnTouch.
3) Connect the USB cable and then turn on
the machine.
4) Run the
"DRUnificationTool.exe".
Figure 5-204
5) Password dialogue box appears, and
enter six characters as "market" and
select [OK].
Figure 5-205
COPYRIGHT © CANON ELECTRONICS INC. 2011
CaptureOnTouch
how to operate
installed file
CANON DR-M160 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
6) The initial screen is displayed.
is
7) Select [Select Scanner] to run each
service
Registration] to register firmware.
8) If you select [Select Scanner], the
scanner selection screen is displayed to
select the connected scanner.
For DR-M160.DLL only
When there are other DLLs
Figure 5-206
mode, or select
Figure 5-207
[Firm
5-7