Flight Test; Revision 0 10640I00.Slk - Honeywell KHF 1050 System Installation Manual

Preliminary - Subject to Change Without Notice
7.B.(2) System Interwiring Check
7.B.(2)(a) Check that all cables and interwiring are installed
7.B.(2)(b) Check that all functions are properly strapped to
7.B.(2)(c) Double-check continuity of all power pins.
7.B.(3) Visual Inspection
Perform the visual inspection/check procedure (Table
2010).
7.B.(4) Post-Installation Test
7.B.(4)(a) Perform the System Performance Check in FAULT
7.B.(4)(b) Establish communications with another HF station in
7.C. Flight Test
While in flight, establish communications with another HF
station. It is important that the frequencies selected be
apropriate for the distance between the aircraft and the other
station (see Table 2011). Request a signal and audio quality
report, preferably on several different operating
frequencies.
Frequency Band
(MHz)
2.8
4.4
5.5
6.5
8.8
Revision 0
10640I00.SLK
KHF 1050 SYSTEM INSTALLATION MANUAL
according to the interwiring and cable fabrication
instructions (section 5.C).
reflect the aircraft system configuration (section
5.D).
ISOLATION, Section 2.
each of the six communication bands (see Table 2011).
Request a signal/audio quality report.
Daytime Distance
(miles)
up to 100
up to 200
up to 300
100 to 600
200 to 800
N
up to 400
up to 1000
100 to 1200
200 to 1500 or greater
400 to 1500 or greater*
23-10-09
Nighttime Distance
(miles)
Page 2042
Mar/2003